Opto-isolated
NMEA input interface
for USB port
(06/15/2009)
USB ports replacing the old serial ports on computers, we developed an
opto-coupled
interface to connect NMEA talkers.
More tips for the gas soldering iron (09/24/2008)
We completed the range
of accessories for the Solderpro
-120:
Active cam cleat (8/12/2008)
Developed by SeaSideTech in collaboration with Michel Desjoyeaux
for offshore racing,
this new
electrical releasable cam cleat
is now available on Splashelec.
It will avoid many dangerous situations.
(photograph of a prototype)
Gas soldering iron (7/7/2008)
This is Jérôme using the
gas soldering iron.
Now, we have them in stock.
 ,
Wireless link for wind vane
(6/19/2008)
The wireless
link for a ST60 wind sensor makes disappear all the problems
with the mast cable between the wind sensor and the repeater.
The weight of the overall system diminishes:
Radar detector (5/16/2008)
Baudoin Electronique (installation of marine electronics in Brest France, see
Google's satellite images)
opens its website splashelec.com
and offers for sale the MerVeille radar detector
and its accessories.
Many other products are to come...
Take a look at these two example installations of the detector:
On a cruising yacht
Why to install a MerVeille radar detector in addition to a radar?
Their uses are complementary
(reduced power consumption and simple manipulation - viewing the surroundings).
On a mini 6.50 designed for solo regattas
(see the mini class website)
Most of the boats of the class use the radar detector.
But where is the MerVeille's antenna?
Inside! The sensibility is more than sufficient and the antenna
is less exposed on these small "wild" boats.
 |
